Discuss Please can anyone help identify this thermostatic mixer tap? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
Hi. For the first time since moving in 7 years ago, my pre-existing bath hot tap is only running luke warm to cold. The attached shower is the usual decent hot temp as is the basin and kitchen tap. (I've got a combi boiler.) From reading the forums I thought maybe the thermostat cartridge might be knackered and need replacing, but that is just a guess. The water doesn't run any hotter if I reduce the flow. If it is a worn cartridge or a value, where would the access usually be to see what type of replacement is needed please? (If that is the issue?)
Thanks
Reply to Please can anyone help identify this thermostatic mixer tap? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4 times since.
It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
