Search the forum,

Discuss Please can anybody identify this bath? in the DIY Plumbing Forum area at PlumbersForums.net

Messages
3
I need to replace the bath panel on my P bath, but it came with the house and I don't know what type it is. It has a fairly small bulge for the shower end of the bath, so a lot of p bath panels wouldn't fit. I've checked the most popular bathroom places with no luck.


Thanks
IMG_1274.jpeg
IMG_1275.jpeg
 
Remove the panel and look all around the bath for a sticker with product information.
Don’t forget it could be on the end or the side which is against the wall, so mirror on stick may be helpful!
Or some lighting and then record a video on your phone poking it where you can’t get your head.
There may be a similar sticker on the back of the panel itself.
If you can’t find any info - I’m afraid you are on a hiding to nothing.
 
Is there any opportunity to repair or refurbish the panel you have? I'm thinking fibreglass repair kit, and/or refinishing or repainting the surface by a car body repair shop or similar specialist.
The bath looks of an older style, so even if you identify it, the chances of finding a replacement panel would be slim.
 
Car body shop as it’s just fibreglass ?
 

Reply to Please can anybody identify this bath? in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
263
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
324
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
183
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
197
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock