B
buckley plumb
Hi quoting for a reply old church building. Can anyone post a link of a good heat exchanger as I want to keep new boiler circuit separate
- Thread starter buckley plumb
- Start date
- Replies 3
- Views 878
- exchanger exchangers heat heat exchanger plate products these
Discuss Plate heat exchanger in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 34,369
- Solutions
- 2
we use these
[DLMURL="http://www.sondexphe.co.uk/en-GB/Home-2.aspx"]Sondex - International Supplier of Plate Heat Exchangers[/DLMURL]
[DLMURL="http://www.sondexphe.co.uk/en-GB/Home-2.aspx"]Sondex - International Supplier of Plate Heat Exchangers[/DLMURL]
Last edited by a moderator:
D
Dotty
- Messages
- 647
and we use these but get them through Albion (who make cylinders)
Products - SWEP
what sort of power are you looking at Kw?
Products - SWEP
what sort of power are you looking at Kw?
Last edited:
- Status
Reply to Plate heat exchanger in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
I have a Baxi Duo Tech 28 HE. According to an online search with the serial number and GC number, I should have a 20-plate heat exchanger. So, I...
- Question
We just had a service done on our Ideal ICOS boiler and were told that the 2 screws on the back of the heat exchanger have snapped off. It was...
I have a thermal store heated by a boiler with its own thermostat. I also have a stove with a back boiler. The stove heats water in a separate...
Hi,
Boiler is losing pressure, from 1.5 bar to 0 bar in about 4 hours.
Have checked all rads and seem to be fine, no water out external prv...
Hi everyone,
I have taken out the heat exchanger because a tiny leak was found around the red gasket at the top of the heat exchanger of a...