Discuss Neostrahl tap leaking in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

as1981

All,

I have one of the taps shown in the attachment. I can't find any way of opening it to repair the leak. Could anyone advise?

Thank

Andrew
 

Attachments

  • 20170203_084504[1].jpg
    20170203_084504[1].jpg
    98.5 KB · Views: 19
Can't help with that, sorry.

But I can tell you, that I had a problem tap and the only name visible was Neostrahl on the nozzle.
They come out, and on my tap the name only applied to the nozzle, not the tap.

There might be a very small grub screw at the back.
 
Status
Not open for further replies.

Reply to Neostrahl tap leaking in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a...
Replies
2
Views
357
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
235
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
285
PSxxxxxx
P
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
273
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
223
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock