Search the forum,

Discuss Main eco Compact 30kw question on rear pipework. in the Gas Engineers Forum area at PlumbersForums.net

Gordon T

Plumbers Arms member
Plumber
Gas Engineer
Messages
120
Ive heard its possible to get the pipework up the back of this appliance by removing a baffle fitted to the boiler. Is this correct?

Im having trouble getting it to fit inside a very tight cupboard with the standard stand off jig fitted. Ive been looking at the sizes on the website only and dont want to commit to buying if it has to be fitted with the stand off jig. G.
 
Baxi / main would void / have voided the warranty if you do the mod
 
The rep says it will void the warranty If you remove the back bar, pay the extra for the baxi which has a spacer for rear pipes
 

Reply to Main eco Compact 30kw question on rear pipework. in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
181
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
193
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
437
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
223
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
184
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock