Discuss Just been good to myself in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
no it was tbh , was trying to tempt me into getting one, i came close
 
I've used mine a few times since I got it, it amazes me just how much of a difference a decent drill and cores make.
The only thing I need is to get a couple more extension pieces, makes light work of tenement walls (4ft thick).
It was Tamz we should be thanking for pointing me in the right direction with this!
 
im like the kid on christmas morning , grining ear to ear , i even text the mrs and bragged never had a good a set up as this
 
Yup ordered from the same place, seem about the best value i've seen, i may have to organise some extensions as i've only got the ones from my sds set
if bod carnt find his have got sum spare ones, they are 1/2" male/female bout 300mm and hollow.
pm me , will send ya one for p+p
 
PTS sell extension bars for about a tenner for a 250mm or 300mm whatever it is. You can keep joining them together.
Deepest hole i've cored is about 6ft (that doesn't sound right :smile:) from a pub toilet (worse :blush5: ) through at an angle to above a suspended ceiling. Just kept adding extensions. Lots of extensions puts a lot of strain on the gun tho.
 
Gave it a go today, am very impressed, put 162mm core through in no time. Only slight criticism is its no the most ergonomic design and would probably be a little uncomfortable to use for a prolonged period, but all in all well recommended. :)
 
Status
Not open for further replies.

Reply to Just been good to myself in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer...
Replies
2
Views
183
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler...
Replies
1
Views
200
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
265
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
346
    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with...
Replies
5
Views
1K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock