Search the forum,

URGENT INTIAL GAS SAFE INSPECTION

Discuss INTIAL GAS SAFE INSPECTION in the Gas Engineers Forum area at PlumbersForums.net

S

suhw00p

Messages
4
Hi people of this forum I have a quite unique situation, I have recently finished my college course and have applied for my GSR, the previous threads that I have read in this forum say that they would like to see a calibrated FGA, knowing this I have looked up the prices and they are way out of my budget, bare in mind I am only twenty years of age. Can someone shine some light on this matter for me because I am quite worried to say the least ;(
 
Iirc City plumbing (others may do it too) let you hire one for day/week basis, it was about £10, but probably dearer now. This should obviously be calibrated and go from there. Alternatively purchase a 2nd hand one and get in calibrated Or better if it comes with calibration certificate.
 
As Undertrained has stated plumbers merchants usually have them for hire ? , my local Plumbase has 3 calibrated anton units for hire at £15.00 a day .
I recently had to purchase a new unit when mine was found to be past economical repair on its service and calibration, I part exchanged it for another Testo 327 the basic kit was £399 +vat direct from them via Plumbase. 😉👍 Kop
 

Reply to INTIAL GAS SAFE INSPECTION in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
135
Stigster
Stigster
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
321
Chuck
C
sammie81116
Sewer pipe problems not sure about it
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
492
Chuck
C
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
242
exedon2
exedon2
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
262
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock