Search the forum,

Identify this shower valve?

Post new thread

Discuss Identify this shower valve? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

D

dendenden

Messages
1
Hi all,

This shower valve is about 20 years old. Can anyone with a bit more experience than me identify the brand/model? No markings visible. Distance between centre of valves: 70mm

Thanks in advance
PXL_20230314_082528290.jpg

PXL_20230314_082455129.jpg
 
Looks very similar to the version 1 Vado Mix valves although I'm certain its not.

Whats the issue, you've got it exposed and its 20 years old. I would just be putting a new one in and because its fairly standard you won't have an issue with something of a similar size
 

Reply to Identify this shower valve? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
157
Stigster
Stigster
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
246
Firefox
F
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
375
Chuck
C
B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
208
ShaunCorbs
ShaunCorbs
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
292
exedon2
exedon2
Creating content since 2001. Untold Media.

Newest Plumbing Threads

DIY Talk
Tiling Advice Live
Tiling Advice
Tiling News
Tilers Forums UK
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock