Discuss How to seal shower dog legs in the USA area at PlumbersForums.net
- Messages
- 12,703
Do you mean these?
2 Pcs 1/2 - https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwjeocmw3uXpAhWHs-0KHTfcBeUYABAFGgJkZw&ohost=www.google.com&cid=CAESQeD2OY7pa1tuZxMEsicVv48bO4Rb3PbEEiGZyAdrWI9B9-aI2h7Zwd21ZVLM7WJAJuUsuzRT99fZpvlC77oMQ3hR&sig=AOD64_2E0iMrfKQy9a3LluWw6TXnFs2EXQ&ctype=5&q=&ved=2ahUKEwilocGw3uXpAhXgVBUIHfsPCucQ9aACegQIDBA3&adurl
I would say either loctite thread lock, PTFE tape or cord, an olive if it takes one or the seal provided (if they are).
2 Pcs 1/2 - https://www.googleadservices.com/pagead/aclk?sa=L&ai=DChcSEwjeocmw3uXpAhWHs-0KHTfcBeUYABAFGgJkZw&ohost=www.google.com&cid=CAESQeD2OY7pa1tuZxMEsicVv48bO4Rb3PbEEiGZyAdrWI9B9-aI2h7Zwd21ZVLM7WJAJuUsuzRT99fZpvlC77oMQ3hR&sig=AOD64_2E0iMrfKQy9a3LluWw6TXnFs2EXQ&ctype=5&q=&ved=2ahUKEwilocGw3uXpAhXgVBUIHfsPCucQ9aACegQIDBA3&adurl
I would say either loctite thread lock, PTFE tape or cord, an olive if it takes one or the seal provided (if they are).
Reply to How to seal shower dog legs in the USA area at PlumbersForums.net
Similar plumbing topics
Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
The left rear floor corner is highest (the shower pan touches/sits on the floor), sloping down diagonally to the front right corner (lowest). The front right corner shim is 5/8", the left front corner is 3/8" shimmed, with shorter shims under left middle and right rear corner.
The pan perimeters...
- Question
is it feasible to connect a flo force or saniflo shower pump drain to a washing machine standpipe
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed.
Is there a seal behind the body?
Thanks.
Hi All
I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Creating content since 2001. Untold Media.
Newest Plumbing Threads
-
Replacing outdoor P-Trap Gully with Bottle Gully
- Started by DIwhYdidIstartThis
- Replies: 0
-
-
-
-
-
Mixer mixer shower, compatible with tanked supply
- Started by Matt0029
- Replies: 2
-
-
No Hot water, Fixed and Broken Again Ideal Logic 24
- Started by Filthbags
- Replies: 2
-
-
What's happening to this radiator, paint flaking off?
- Started by mikmikmikmik2024
- Replies: 3
-
Is it necessary to earth bond a Kitchen Sink?
- Started by Cello
- Replies: 5
-
Show us your fanciest radiators you have installed!!
- Started by Lou
- Replies: 2
-
Y Plan, no hot water but heating is working when called
- Started by Chopper9495
- Replies: 8
-
-
Towel Rail Valve Advice please (35 Characters needed.)
- Started by NorthernLad
- Replies: 7