Search the forum,

Discuss How to keep your hands warm going up stairs in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

Radioman

f6530bfff80ff8c08081ff85b5c7e057.jpg
 
I've seen the same thing fitted in a place in Hackney a few year's ago....this did bring back a few memorie's ......regards Turnpin:rofl:
 
I posted that same photo here on Hall of Shame Photos section just a few days ago.
It is supposed to have come from a Dublin firm on what they find
 
I've actually hung some panels on that angle.
Not sideways, but leaning forward.

The external walls were leaning in on a 35 degree angle.
Was concerned about the wall brackets because there was more weight leaning forward. Wasn't sure whether the brackets would take the forward weight.

Never had any complaints or call backs
 
I've actually hung some panels on that angle.
Not sideways, but leaning forward.

The external walls were leaning in on a 35 degree angle.
Was concerned about the wall brackets because there was more weight leaning forward. Wasn't sure whether the brackets would take the forward weight.

Never had any complaints or call backs

Difficult to reach the phone when your lying under a radiator:furious3:
 
Status
Not open for further replies.

Reply to How to keep your hands warm going up stairs in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
250
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. Itā€™s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
337
I have a green star ten yrs old keeps increasing pressure, feel on off filling valve not working, drain off to recommended, but after few days it's increased whilst cold...is this a regular problem.
Replies
1
Views
146
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
267
Hi. I need a new toilet supply line but donā€™t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
188
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock