Guys , I dont know where to start , help .

[townfanjon]

All I want is a bit of support and understanding and perhaps a whip-round , and all you lot do is take the pi@@

 

[ShaunCorbs]

think we should have a get together and say some last words while supporting town

 

[Best]

If the Makita cost say, £500 and it has done 18 years, that works out as approx £28 per year, or about 70 pence per week of a 40 working week, or less than 14 pence per a working day.
Puts it in perspective.
It probably paid for itself in the first 2 months.

 

[Ric2013]

Get a motor specialist to rewind the motor if it's that important. EDIT i.e. replace the coils in the windings, if that's the problem.

 

[Best]

Get a motor specialist to rewind the motor if it's that important. EDIT i.e. replace the coils in the windings, if that's the problem.

Hell of a good motor in them Makitas.
Probably cost too much, if even possible.
I think the quality machines have multiple windings.
I think he should bite the bullet and spend money.

 

[Last Plumber]

If the Makita cost say, £500 and it has done 18 years, that works out as approx £28 per year, or about 70 pence per week of a 40 working week, or less than 14 pence per a working day.
Puts it in perspective.
It probably paid for itself in the first 2 months.

Yeah but he's from the White Rose County, (they can be a bit tight, not all but some)
You could always sell that Yorkshire Passport!

 

[townfanjon]

Nah , PRICELESS

 

[leelister6]

#prayfortownfanjohn

 

[Last Plumber]

#prayfortownfanjohn

We could have a Yorkshire Pud chucking competition to raise funds?

 

[townfanjon]

We could have a Yorkshire Pud chucking competition to raise funds?

I think we will need one I have just been seeing what a new one will cost , £500 ish