Discuss good 18v cordless? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Z

zackb

hi all,
any recommendations on a good cordless 18v drill within a bugdet of £90?
the one i have now just cant do the job anymore lol
thanks
zack
 
on that budget you will struggle a bit.
the new ryobi stuff isnt bad at all though and will probably be around 90 quid.

either that or start saving
 
Milwaukee fuel all the way. out of your budget but are a hell of a lot cheaper when bought from America r
 
Do you have other cordless gear, if your batteries are ok try finding a bare unit that takes your other batteries that may help in that price range.
 
Dozens to chose from at that price but you will have to sacrifice something. ie. one battery, lower Ah battery's.
This is a great buy:
Hitachi DV18DSFL/JC 18V 1.5Ah Li-lon Cordless Combi Drill | Cordless Combi Drills | NoLinkingToThis
 
Dozens to chose from at that price but you will have to sacrifice something. ie. one battery, lower Ah battery's.
This is a great buy:
Hitachi DV18DSFL/JC 18V 1.5Ah Li-lon Cordless Combi Drill | Cordless Combi Drills | NoLinkingToThis

True, if you up your budget a bit you can go Makita

Makita DHP453RFW 18V 3.0Ah Li-Ion Cordless LXT Combi Drill | Cordless Combi Drills | NoLinkingToThis

where I suppose a 3A bat will last twice as long as a 1.5A.
 
True, if you up your budget a bit you can go Makita

Makita DHP453RFW 18V 3.0Ah Li-Ion Cordless LXT Combi Drill | Cordless Combi Drills | NoLinkingToThis

where I suppose a 3A bat will last twice as long as a 1.5A.

3Ah battery will last twice as long on a charge as a 1.5Ah, but I would prefer to have two of 1.5Ah batteries as only one 3Ah battery. That way I have lighter batteries & always one fully charged, yet same power & run time overall.
My brother has the Hitachi Combi drill for DIY use, but I wouldn't rate it much. It cuts out if you work it hard & it's a bit bulky. But to be fair, it is a very decent drill for the money, but it is not a pro drill. The Bosch combi drill from Screwfix with 2 of 2Ah batteries for £150 has good torque & nice & compact size.
 
Last edited:
3Ah battery will last twice as long on a charge as a 1.5Ah, but I would prefer to have two of 1.5Ah batteries as only one 3Ah battery. That way I have lighter batteries & always one fully charged, yet same power & run time overall.
My brother has the Hitachi Combi drill for DIY use, but I wouldn't rate it much. It cuts out if you work it hard & it's a bit bulky. But to be fair, it is a very decent drill for the money, but it is not a pro drill. The Bosch combi drill from Screwfix with 2 of 2Ah batteries for £150 has good torque & nice & compact size.

I agree that two batteries are preferable but my reasoning is it starts him on a far superior platform and if he want's to buy an impact driver, SDS or even just another battery he can do so at a later date when he has or is willing to spend more money. Tbh mate I don't think Ive never seen a Makita 18v Combi with 2 bats at that price usually they're £200 + unless I'm mistaken.
 
Last edited:
I agree that two batteries are preferable but my reasoning is it starts him on a far superior platform and if he want's to buy an impact driver, SDS or even just another battery he can do so at a later date when he has or is willing to spend more money. Tbh mate I don't think Ive never seen a Makita 18v Combi with 2 bats at that price usually they're £200 + unless I'm mistaken.

Yes, you could be right Antdad, - the Makita might be decent enough, although as you know, there are cheap DIY & more professional versions from most manufacturers which all tend to look like same quality & usually with deliberately confusingly model numbers. I decided to avoid the Makita with one battery partly because I think two batteries are essential for times when the drill power dies.
Maybe cheaper versions of Dewalt are also worth a look at. Guess it is what feels good in the hand.
I have some 22volt Hilti stuff now, which are so powerful. I won't ever go with underpowered cheap drills anymore.
 
Status
Not open for further replies.

Reply to good 18v cordless? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with...
Replies
5
Views
984
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I...
Replies
11
Views
350
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the...
Replies
0
Views
178
B
    • Friendly
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper...
Replies
2
Views
239
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one...
Replies
7
Views
304

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock