Search the forum,

Discuss Getting Hot Water, But No Central Heating in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
H

helmans13

Hello
Just bought a property. Old 114 years old building (Ground floor flat).
Note that I'm getting a hot water but central heating do not work.

Boiler - Worcester 24i (system boiler?)

Any ideas what can be wrong?
 
Hello
Just bought a property. Old 114 years old building (Ground floor flat).
Note that I'm getting a hot water but central heating do not work.

Boiler - Worcester 24i (system boiler?)


Any ideas what can be wrong?

turn up the room thermostat !!
 
Or set the timer to come on for central heating.

might pay to get it serviced and have the guy explain to you how it all works if its new to you
 
if you have hot water its not a boiler problem assuming you dont have the immersion heater on be looking at external controls and motorised valves
 
Status
Not open for further replies.

Reply to Getting Hot Water, But No Central Heating in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
126
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
132
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
277
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
224
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
1
Views
90
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock