Discuss Gas Engineers Toolbox in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
I like to keep a bahco 10" wide jaw shifter in my everyday toolbox , it fits 1" nuts a treat without having to go out to van. Have i not convinced you yet ?
 
years ago i bought a crescent shifter with a sliding lever for adjusting instesd of a wheel . hopeless thing, never stayed where you set it too.
 
Going from memory ( i'm only in it 50 times a day) this is what i have in my main box.

Screwdrivers, every size and type i could every need about 15 - 20 of them.
Pipeslices 15, 22 and 28mm (2 x 15 and 2 x 22mm)
Pipecutters, Rigid up to 42mm
Estwing
Feathersplitter
Woodchisels, 1/4" 1/2" 3/4" 1" 1 1/4"
Footprints, 9" and 12"
Knipex Alligators 180mm, 2 x 250mm, 1 x 300mm
Knipex Cobra's 250mm
Knipex smooth jaw grips 250mm.
Bacho adjustables 4" and 8"
4lb club hammer
Cold chisels, 9" 12" and 18"
Multimeter
Test lamp
Socket tester
Knipex pliars, 8" side cut, 4" long nose and wire strippers.
Another old pair of pliars i've had for 20 years!
Circlip pliars
Allen keys, 2 sets
T Bar allen key
Bending springs 8, 10 and 15mm
15 and 22mm guides
Stanley knife and a box of blades.
Half round file and a rasp.
A couple of short rsed drifts.
A load of speed bits in various sizes.
A load of masonary bits 5mm - 25mm
Some metal drills.
A pad saw
A set of metric spanners
A smoke match holder.
2 junior hacksaws, 1 cut back for tight working.
The usual half cwt of screws nuts rings bolts washers and fittings and a few more things i've missed.

There is another box in the van with stuff i don't use much and about another 6 boxes in the garage.

I never carry my own box :lol:
 
whats a feathersplitter m8 ?. one of the best tools I have is a 4 inch adjustable which is ideal for thermocouple and loads of other stuff plus a tang mini rachet set with about 30 bits , Gold dust I had been struggling for years until i found this tool
 
A feather splitter is a bolster chisel used to split the feathers on floorboards when lifting them.
 
Status
Not open for further replies.

Reply to Gas Engineers Toolbox in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I'm looking for a gas engineer who I can work with so I can complete my portfolio. I have done level 2 and 3 tech cert along with bpec gas...
Replies
0
Views
485
Just an update to anyone who was following the thread on this site: Tify to gas engineer, what will it take? I got a DM from a user asking for an...
Replies
2
Views
451
    • Informative
Why am I not surprised? Britain’s gas network still using engines from 1960s RAF fighter jets Ageing aircraft turbines will cost millions to...
Replies
4
Views
652
Hi everyone I currently work in oil and gas industry working in North Sea and further afield operating on high pressure oil and gas plants. This...
Replies
0
Views
879
J
Hi all, I am a plumber but I do not carry out works to boilers as the majority of my is bathrooms so I am not gas safe. I have completed a...
Replies
1
Views
515

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock