Diy or not :D thoughts

[ShaunCorbs]

I think my hot water cylinder hasn’t been plumbed in properly

I'm sure he's done it him self but open to different thoughts

 

[Stigster]

It's a shocker isn't it? Look at the D1 from the T&P relief valve. The plastic! The Tectite wonder! I've asked him in the thread if the 15mm plastic pipe reappearing on the right side rear of the cylinder is the pipe coming from the T&P valve. Also I've asked to see the group inlet as well. I'm half expecting there to not be one.

Like you, I'm pretty certain he's done this himself, clearly not G3 and hasn't got a clue what he's doing.

It's a dangerous install.

 

[Harvest Fields]

I think my hot water cylinder hasn’t been plumbed in properly

I'm sure he's done it him self but open to different thoughts

He could be. That's why I have not commented. Something's sounds off to me. But who knows?

 

[ShaunCorbs]

It's a shocker isn't it? Look at the D1 from the T&P relief valve. The plastic! The Tectite wonder! I've asked him in the thread if the 15mm plastic pipe reappearing on the right side rear of the cylinder is the pipe coming from the T&P valve. Also I've asked to see the group inlet as well. I'm half expecting there to not be one.

Like you, I'm pretty certain he's done this himself, clearly not G3 and hasn't got a clue what he's doing.

It's a dangerous install.

Also d2 rises

 

[Old Account]

A good engineer wouldn't use tectite fittings for a new install, first off 10x more expensive and it ain't as solid as soldered fittings.
Clips screwed to the cylinder are also shocking never seen that before. Definitely the plastic is really shocking ...

If he had concerns regarding his plumber he would have mentioned it but he did not, neither shows the mains water group

 

[townfanjon]

Theres been a few lately , guy with the gas pipe earlier this week was pushing it .

 

[king of pipes]

agree chaps something no quite right there so stayed out of it have a good weekend cheers kop . time for a pint jd and coke town .

 

[townfanjon]

agree chaps something no quite right there so stayed out of it have a good weekend cheers kop . time for a pint jd and coke town .

You know me so well , lol

 

[ShaunCorbs]

and you kop

 

[ShaunCorbs]

Guess the pressure static or dynamic

1/2 old black medium steel

And yes I've got to replace the stop tap