Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Dishwasher plumbing, got this so wrong :-) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

I've heard of someone plumbing a washing machine with one of the self screw in DIY jobs into the gas pipe. Obviously didnt work so they put one on the right pipe and didnt say anything.

Next tenant moves in connects up to gas and then phones us in. They then try to sue the company I worked for for not spotting it but as it was behind cupboards etc and passed tightness etc it wasn't going to be spotted. They didnt get very far apparently.
 
Flippin eck! I’ve seen a gas fire piped into the cold water before.

A company I worked for many many years ago had a couple of lads work for them who managed to get the cold and the gas mixed up doing a boiler install. They did wonder why they couldn't get any water out of the taps. The tenants of the Avenue had something to watch whilst sipping their tenants super as transco had the road up and compressor pumping all the water out.
 
Back in the mists of time when
ELM le Blanc started selling
the 4.20 in Uk we wanted a bigger one so had a 3,00 ? direct from France, no english
instructions so piped it up
al la 4.20 on LPG. decorater
asks what is the water doing coming out of the little pipe out of the wall outside and going miles. We had connected the lpg feed to the mains water somehow as there were no instructions ,, happy days
centralheatking
 
The customer/ scrounger was a Warmfront fortunate candidate. He was a total arse anyway. Spent all afternoon sucking water out with my wet vac and disced the meter off and called out transco.
 

Reply to Dishwasher plumbing, got this so wrong :-) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the...
Replies
0
Views
173
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
207
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
275
PSxxxxxx
P
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
308
I have a green star ten yrs old keeps increasing pressure, feel on off filling valve not working, drain off to recommended, but after few days...
Replies
1
Views
190
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock