G
garethpoole1
Have not came across this regulator/meter before and was trying to perform a tightness test but struggled to get the pressure below 23 mbar after several purges ??
Discuss Delta G65 with REGAL2 regulator issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Reply to Delta G65 with REGAL2 regulator issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hi,
I'm looking for a water pump to pump water from a storage tank at a constant 3 bar pressure.
It's at a campsite I run that's at the bottom of...
WB 4000 installed a few months back, just balanced the 7 rads - managed to get around 15 degrees delta across most rads. Not quite the 20 degrees...
Hi,
Non-professional / knowledgeable person here.
I'm a Brit in Romania who volunteers for a charity building an old peoples home for needy old...
Wb 4000 recently installed, and just balanced the rads with around 16 degree delta across most rads.
I'm trying to make sure that the return...
- Return temperature
- Central Heating Forum
Hi just come across an installation low pressure and primary and secondary meter both have regulators installed.
Pretty sure it's not allowed...