Brown sticky residue inside Ideal Logic

[mcniven]

Was working on said boiler and I noticed on the inside there was a small puddle of thick brown residue, there was no visible leak from pump or anything else either, if never seen this before.

I should of took a picture, anyone ever came across this nah.. lol

 

[mcniven]

I'm talking thick.... Like honey

 

[tamz]

I've seen that inside a few boilers. Haven't a clue what it is and its never bothered me because i haven't got my csi ticket :lol:

 

[Roger Welton]

What did it taste like?

 

[Ermintrude]

Is it organic? I.e a sulphur or is it man made? Brick dust? Could the flue have been greased with something other than silicone grease?

 

[vern]

Was working on said boiler and I noticed on the inside there was a small puddle of thick brown residue, there was no visible leak from pump or anything else either, if never seen this before.

I should of took a picture, anyone ever came across this nah.. lol

Had it myself pal on a logic plus 35 had the mirror out, mystery, cleaned it up and will re check it looks like inhibitor when it comes in contact with air

 

[REDSAW]

[h=2]Brown sticky residue inside Ideal Logic- thick brown residue ![/h]ideal boiler!, hmmmm!!

let me think, does it smell like a fart.lol

 

[vern]

Brown sticky residue inside Ideal Logic- thick brown residue !

ideal boiler!, hmmmm!!

let me think, does it smell like a fart.lol

haha classic

 

[ambrosia]

ideal boiler!, hmmmm!!

those new Ideal are actually okay budget boilers

 

[Kev the gas]

Was working on said boiler and I noticed on the inside there was a small puddle of thick brown residue, there was no visible leak from pump or anything else either, if never seen this before.

I should of took a picture, anyone ever came across this nah.. lol

AAV spat its bits out somewhere ??

 

[Billy Bob Bob]

did you use fernox inhibitor?

 

[sputnick]

Have to agree with Ambrosia, logics aren't bad we've fitted about 100 and only had one breakdown, early days. Haven't come across any brown goo yet whilst servicing.

 

[Ermintrude]

Been fitting them for last few years 4 I think might be 5. Fit minimum of 2 a week some Times if we are all on the go its 20. Breakdown is about 3% ish by comparison Baxi duotec GA was in excess of 90%!

 

[shaky]

did you use fernox inhibitor?

Yeah the f1 can be a sticky substance I use it when I've had a leak on a rad the pipe is all sticky. I do rate fernox though.

 

[mcniven]

Heres a pic

Ps there is no leak at pump

 

[Billy Bob Bob]

that looks like fernox,its either come out of the aav or you have left your toffees on the pump

 

[Ermintrude]

that looks like fernox,its either come out of the aav or you have left your toffees on the pump

Fudge bar or.a chomp normally?