Discuss 28cdi combi with f and e in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

armyash

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
2,653
Hi guys,

been out to this boiler, it's a combi but it's not a sealed system it's tank fed.

never seen this before.

customer has complained that hw is intermittent. Colleague of mine has said change the plate. I'm not entirely convinced, went through fault finding, checking pressures and resistances etc and it was pointing to pcb.

Hw hw either boiling hot or hot and cold.

Possibly a sensor?

what do you think? Ever seen this set up before?
thanks
 
is there a pressure gauge? and same never heard of one being set up like that
 
I have heard but never seen this. Its someone trying to re use the f n e tank when new boiler fitted ... it should be pressurized as the f n e tank is simply for filling the heating.... stupid really
 
I have heard but never seen this. Its someone trying to re use the f n e tank when new boiler fitted ... it should be pressurized as the f n e tank is simply for filling the heating.... stupid really

you wouldn't get enough pressure by just the tank you would need a pump/ pressure tester to force it in?
 
have seen it, and done it on very old systems, whereby you fit a plate heat exchanger in the system, thus having the heating circuit (from combi) through the plate pressurised, and open vented on the other side of the plate.

If it has been done this way then pressure should be filled and read at the boiler, ie on boiler filling loop and gauge
 
It was an approved method on the CDI and was in the MI believe it or not!

Have you checked the min and max burner pressure?
 
image.jpg
 
Blimey, you youngsters!

I remember selling Worcester heatlaves with an F&E tank on top of the boiler!

<plays hovis music>
 
Blimey, you youngsters!

I remember selling Worcester heatlaves with an F&E tank on top of the boiler!

<plays hovis music>

[video=youtube_share;6Mq59ykPnAE]https://youtu.be/6Mq59ykPnAE?t=13[/video]
 
Status
Not open for further replies.

Reply to 28cdi combi with f and e in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all, Got a nightmare situation with a central heating system I recently adopted. It's an open vent system with a combined F&E pipe, with a...
Replies
17
Views
2K
Hi, My combi-boiler has just given up heating the house and basically only delivers hot water. While in central heating mode it heats up and stops...
Replies
2
Views
995
D
Hi, I moved into a house with a Trianco Maxi Aztec wet electric combi boiler. The system is too expensive for us to run, so we are removing in 3/4...
Replies
1
Views
1K
A
Our building has a boiler that provides both hydronic heat and domestic hot water. It's been working without any serious problems for 10+ years...
Replies
0
Views
649
arkay-eff
A
    • Like
Hi all, We recently purchased a house and nothing seems to work correctly here, I've spent weeks rectifying issues. Plumbing, electrical...
Replies
47
Views
5K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock