You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
200-w
The .38 S&W, also commonly known as .38 S&W Short (it is sometimes referred to as .38 S&W Short to differentiate it from .38 Long Colt and .38 Special), 9×20mmR, or .38/200, is a revolver cartridge developed by Smith & Wesson in 1877. Versions of the cartridge were the standard revolver cartridges of the British military from 1922 to 1963. Though similar in name, it is not interchangeable with the later .38 Special due to a different case shape and slightly larger bullet diameter.
Hi, Hopefully someone can throw some light on if this is a real issue or not.
I have had this boiler for about 10 years, I noticed just recently that when the CH has been turned off that a couple of the rads closest to the boiler were slightly warm. When the boiler had demand to heat the DHW I...
Looking for a bit of advice on which one of these two to get, or any other similar suggestions? Just moved into an old Victorian property and we are replacing the boiler. Considering efficiency and reliability which one should I go for? Many thanks
Hello!
I have a large house, 20 radiators + UFH. Heated house area is about 350 m2. House is class B, it is written in the certificate that house requires 73 kWh(m2/year) for heating. I had my system fully upgraded last year, installed new Vitodens 200-W 49 kW (B2HA) model with Vitotronic 200...
Hi,
My combi-boiler has just given up heating the house and basically only delivers hot water. While in central heating mode it heats up and stops to prevent overheating of the internal section of system. No fault or error code are displayed.
Suspicion: 3-way changeover valve assy.
So I...
We have recently had a Viessmann Vitodens 200-W boiler fitted, and let me start out by saying that it is a superb piece of engineering... apart from bleeding a few radiators and tweaking the settings, no issues whatsoever. Except...!
I received an e-mail from Viessmann, asking me if we wanted...
Evening All,
Hoping some plumbing/heating engineers/other knowledgable folk on here might be able to assist with some questions about my new boiler.
We had the new Viessmann 200-W 35kw Combi installed this week by a Viessmann registered local heating engineer. It's the new 2019 version with...
I have two Vitodens 200-W system boilers connected via a low loss header. They are about 7 years old and have run perfectly since they were first installed until now. They were installed as part of a whole house re-plumb and have had Fernox MB-1 Heating Protector in the circuit since day one...
Viessmann boiler control has two levels of parameters that can be set, level 1 and level 2, but level 2 seems to be almost identical to level 1. What is the purpose of the level2 control options?
Don't know if any1 else is having any problems with these.
Service a few of these around a few schools, offices etc.
one site about 3 years old has 2 of them. First boiler, PCB went faulty in October. Replaced, all fine. The PCB in the other boiler has now gone. Now these are pretty expensive...
Hi,
a client of mine has a viessmann vitodens 200-w system boiler. I have come to the job after 2 previous bodge job builders, so im now there to pick up the pieces. I have managed to fix all the problems but one...
The system has a 2 port valve for the hot water in a megaflo, and 3 2-port...
MP plumb
Thread
200-w
boiler
hot
hot water
motorised
valve
viessmann
vitodens
water
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.