- Messages
- 10,442
Yes mate but do them one at a time.
Discuss 1 Radiator not working....... in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Close both valves all the way and open them
Back up again. Remember to count how many turns you have done
Close them both, then open them all the way then adjust them back to where they was mate.
Hi again, I have no flow to the radiator only a trickle coming out,Close them both, then open them all the way then adjust them back to where they was mate.
Best way to clear this? If I fix a hose to the flow inlet should this do the trick.Sounds like a blockage in the pipework then.
1. In your post #15, was this with the radiator and both valves removed? In other words, with the ends of both flow and return pipes completely open was there little or no flow?
2. You need to establish which pipe (flow or return, or both) is blocked.
3. It would be better to flush through from the other end of the offending pipe(s), for example, from the next radiator preceding / following this one, flushing into the open pipe end. If you flush from the open pipe end you run the risk of moving any blockage to another location.
Reply to 1 Radiator not working....... in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.