My Saniflo spits water out of the breather valve [through the black sponge filter]. I took it apart and changed the large rubber ring around the inlet to the macerator [it was hardened and distorted and would not fit back in place. I replaced the small rubber cup that closes off the air valve...
Visited a customer today who has just moved in. In their cellar they have inherited a setup with the washing machine located down there with the waste dealt with via a saniflo (only serving the washing machine).
Now the install looks like a complete bodge with push fit fittings and very little...
iain85
Thread
advice
machine
please
saniflo
vertical
washing
water
hi guys, I have a saniflo and someone dropped a cloth down it, jammed the motor and fried the printed circuit board, does anyone know where I can get spare parts for it, particularly the pcb?cheers
I have a Sanicompact 43 toilet . The problem is the pump switches on on its own and also will not stop running until
the electric is switched off. Any ideas what could be the cause of this??
Thanks
Hi everyone, I'm new to the forum and have a couple of questions about Saniflo products:-
1. Are they any good?
2. Are there any cheaper/better alternatives?
The reason for my asking is that I'm due to start a project for an En-Suite which doesn't permit me to use conventional drains, due to...
SFT223
Thread
access
grundfos
macerator
products
saniflo
service
what an afternoon . saniflow fitted with 21mm pipe not even glued and no fall bent into all shapes to go through walls etc.been like this for years and worked I don't know how customer complains of it not working and leaves me key . I re fit fuse and it runs constantly I then lean down to look...
Really hoping I can get advise as I've had the local saniflo engineer out, I've had plumbers advice, tried contacting saniflo, and still no clue. My saniflo operates shower, wc, and sink. Worked very well for years. Sink and shower still work well and drain normally but recently when flushing...
A stout
Thread
bits
cleaning
close
drain
pipes
replacing
return
saniflo
shower
tried
water
had a call today to a old disabled lady with a saniflow that would not stop "blending" . it had been on for hours apparantley , by the time i got there it had tripped on the 30AMP supply it was getting!!!!!! anyway i removed the unit. took it outisde and cleaned it with a hose, firts thaught is...
hi all,
has anyone got any links to were i could find any instructions/parts, or drawings for the grundfos macerator x. the one i have just looked at, the pan spigot connection has come away from the macerator itself and when the toilet is flushed hence water is discharging from here.
i have...
The sanislim requires a height of 320mm from the top of the close coupled wc to the floor. Width not so much of a problem. However, I can't find a wc with this space at the back, and I don't want to studwall the toilet out any more than necessary as we are pushed for space. I just want the...
Hi Guys,
i have a question about the saniflo pro unit. I am building a granny flat at the end of the garden and the AJ at the main house is at a higher level than the flat so we went for the saniflo unit. I was wondering does anyone know if you can drop the pipe coming from the saniflo unit...
Just love it...click ya fingers basement becomes a kitchen, click ya fingers a shower room is instant....smug git in his bib n brace... preferred it when Bob Geldolf and reverend Bono clicked there fingers an someone died.....hopefully the smug git...
I have a saniflo fitted for washbasin and toilet waste. It has developed a problem ( it grinds at various times throughout the day ) but instead of a repair was considering getting the new quieter version fitted. Is the noise difference noticeable?
Have to put in a saniflow and waste will be overflow , the big issue i have is that wont be able to use obtuse fittings to take the radius on the bends due to lack of space i have top operate in will a couple elbows in the run actually make a difference in the discharge??
Rule number 2 If a vertical run is required it should be within 300mm of the unit. Do they mean the actual discharge outlet or the side of the unit? I need about 450mm from the actual outlet or am I bending the rules to suit.
I want to fit a Saniflo mascerator onto a soil pipe. I have 2 flats with wc, shower, sinks & washing maching that feed into the 4" soil pipe. This soil pipe goes into a manhole that is blocked and needs rebuilt. I want to fit a Saniflo onto the sewer pipe before it enters the manhole, this...
The fuse of my Saniflo X2 blows all the time
I cleaned the unit but the fuse blows as soon as you put it in.
Any suggestions ?
It looks like the pump and ginder is 1 unit, is there partnumber for this and what does it cost and where can I order it ?
Hello guys, looking for wisdom and possibly some tips, i am fitting a saniplus soon and i know that the discharge pipe diameter size is 22mm, now does this have to be copper or can it be overflow pipe? i know copper will advantageous because of the joint free bends but i am thinking that copper...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.