Search the forum,

Discuss Baxi Miscellaneous Error in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
27
Hi

I've come back from a two week holiday to find my Baxi boiler displaying an error. It's a Baxi Ecoblue Advance 19 Heat ERP and the error is a red light flashing 6 times. This seems to mean "Miscellaneous" in terms of error codes. A reset is doing nothing.

I've had a plumber out who's immediately pointed to the Central Heating pump in the landing cupboard. In fairness, the pump looks goosed and someone on here once said the washers on it needed replacing so I'm quite ready to believe it needs to go. But he also mentioned that the valve that diverts water to heating, the hot water tank or both (can't remember the name of it) needs replacing too...and this has baffled me because it's only about a year old (both the valve and the electric motor/head that drives it) and when I tested the valve it seems to be working and hasn't seized so I'm just co concerned I'm being conned here. It was quoted close to 500 quid for the new pump, new valve and the installation.

I'm just wondering if:

A) this sounds right/wrong
B) is it likely this is causing the error on the boiler

Thanks!
 
It might be the boiler they have had a habit of the control / pcb units failing
 

Reply to Baxi Miscellaneous Error in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Hi, I'm hoping someone here may be able to help me out with an issue I have with my baxi duotec boiler. Basically, the hot water temperature has been fluctuating quite alot, dropping in temp then raising again whilst showering. I have had an engineer out who has changed the thermistor, but I am...
Replies
5
Views
426
Hiya fellow gas engineer. Need some help on this boiler fault. Went out to this E133 Error on a Potterton Titanium 24 (GC: 47-393-39) I checked the inlet standing pressure which was at 25mb. Boiler attempts to fire and the pressure drops by 1mb but the gas valve doesn't open. Checked the black...
Replies
9
Views
432
I have a very strange issue with my BAXI 105e DHW. if i turn on the hot tap the pump starts and demand for DHW is shown, after a some seconds it will show an error, 60 degree, pump or flow. Well switch the tap off wait maybe fifteen seconds turn tap on and low and behold hot water. If after a...
Replies
1
Views
484
Hi everyone, I'm new here! I've bought my first house - needs a fair bit of work doing to it, including the plumbing. I'm keen to do stuff myself rather than getting contractors in, wherever possible, not just for cost, but also because I want to learn (a useful life skill surely!) I'll...
Replies
11
Views
898
W
Hi all, I've got a bit of a strange issue relating to my Ideal Logic Combi 35 which has recently started displaying a F2 error when trying to use the central heating system. The boiler works fine when using hot water, however when I try to turn on the central heating system the boiler works...
Replies
2
Views
964
Williams25
W
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock