Search the forum,

105e

Flying Dust 105E is an Indian reserve of the Flying Dust First Nation in Saskatchewan.

View More On Wikipedia.org
  1. P

    BAXI 105e, DHW Strange issue

    I have a very strange issue with my BAXI 105e DHW. if i turn on the hot tap the pump starts and demand for DHW is shown, after a some seconds it will show an error, 60 degree, pump or flow. Well switch the tap off wait maybe fifteen seconds turn tap on and low and behold hot water. If after a...
  2. P

    Baxi 105e dhw strange

    Hope someone can offer some help with this issue, I have a Baxi 105e works fine no real downside, serviced looked after regularly. Have an issue with hot water, open hot water taps runs cold and indicates on boiler 60degrees or pump or pressure problem. Leave it ten seconds open taps again low...
  3. G

    Baxi 105e CH loud screeching/whining

    Hi, around 3 week following a diverter overhaul with a valve and seal kit (due to leak between diverter housing and diff housing) the noise started to occur within a few minutes of activating CH. I'm pretty sure the noise is coming from the diverter and it is carried along pipework in walls and...
  4. S

    Baxi Combi 105e: CH lost 1 bar of pressure in a few hours

    Hi everyone Summary is in the title. Found the boiler was at 0.5 bar earlier today so topped up to 1.5 bar. Checked before bed and its back to 0.5 bar. There are no signs of a leak around any radiators nor any suspicious water damage on the downstairs ceiling. Before I rip up all the flooring...
  5. P

    Baxi 105e strange issue, for me

    I’m sure the gurus on here will have an idea what is going on with this boiler. Well boiler suddenly switches off, no ch or dhw, but main power light on no error lights etc. so check all usual suspects all fine, but, check across reset switch and output appears as about 24 volts when I/p to...
  6. B

    Baxi 105e Advice Please (Repair or Replace) ?

    Hello All, First post here, I confess to being wet behind the ears with Baxi 105e major problem so its Urgent! It started with Flame Failure Error > Gas Engineer got it working (No Parts Needed) but it went out again 2 hours later, On his 2nd visit he said that the problem must be with the...
  7. P

    Replacing ch diaphragm on Baxi 105E

    Hi I have just bought the kit to replace the CH diaphragm as the pin is not going all the way back. When I look to get in to do it there is no space to get spanner’s, screwdrivers in etc. It is all blocked by the DHW diverter, pipes and wires. Any advise on how best to get access? many thanks Paul
  8. P

    How to replace a Baxi 105E microswitch?

    Hi Looking to replace the Baxi 105E microswitch but Worried about getting the white connectors off without damaging the wiring. has anyone done it and if so is there a trick to getting the connectors off?
  9. A

    Low pressure bar - Baxi 105e

    Hi all , just looking for a little bit of help with this if possible. My boiler is showing low pressure and after watching countless videos and reading other threads I’m still stuck on what I should be touching or if I’m missing a fill pipe and that’s why or whether the taps are there and I...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock