Ideal Boiler No Hot Water

[davecpfc]

Hi

Hope this is in the right place, looking for some advise.

I have an Ideal Icos HE24 boiler and today it has stopped heating water. It has power running to it, both the time display and boiler.
The source code is 0 but the light for the burner doesn't come on and holding reset doesn't do anything.
I have turned the whole boiler off and turned back on, when I do this it flashes 4 once and then goes to 0 on the source and has no bar of pressure showing.

Is there anything I am able to do?

If you need any further details please let me know and thanks

 

[buckley plumb]

It's the honeywell control known for relay faults when green light comes on does it click if not phone them they have 5 year warranty on these due to this fault. Done a few. Unusual for both to go though

 

[buckley plumb]

It's the honeywell control known for relay faults when green light comes on does it click if not phone them they have 5 year warranty on these due to this fault. Done a few. Unusual for both to go though hu

 

[davecpfc]

It's the honeywell control known for relay faults when green light comes on does it click if not phone them they have 5 year warranty on these due to this fault. Done a few. Unusual for both to go though hu

It does still click if I turn the setting to off then on again but may still call them in the morning although I have a feeling I would be outside the 5 year warranty

 

[PhoenixServices]

What is your room thermostat set to?

 

[davecpfc]

What is your room thermostat set to?

It was at 18 I have it at 30 to see if that helped