Search the forum,
S

Sarah80

From Nottingham
Joined
Last seen
Messages
10
Reaction score
0
Points
1

Latest activity Postings About

    • S
      Sarah80 replied to the thread Fd fault on Ideal Heat 15.
      Yes the valves are open. When we tap the pipe attached to the fernox filter the boiler will light and as soon as you stop tapping it...
    • S
      Sarah80 replied to the thread Fd fault on Ideal Heat 15.
      Ok, so I’ve taken the magnet out of the fernox filter and when I hold it next to what I believe is the air separator 🤨 it pulls near the...
    • S
      Sarah80 replied to the thread Fd fault on Ideal Heat 15.
      No machine, he put a hose on the bottom of the Fernox filter and x800 in the tank up the loft. But because pump won’t work with the...
    • S
      Sarah80 replied to the thread Fd fault on Ideal Heat 15.
      Ah right ok then! So the pump has to be running for it to work? Makes sense to me thinking about it! I just told the second plumber what...
    • S
      Sarah80 replied to the thread Fd fault on Ideal Heat 15.
      Had two heating engineers out and they can’t pinpoint it! BUT, although its had a flush the pump wasn’t running so I think maybe put the...
    • S
      Sarah80 replied to the thread Fd fault on Ideal Heat 15.
      Weird this is but if I tap on the fernox filter above boiler the boiler light comes on and when I stop tapping it, the light goes off...
    • S
      Sarah80 replied to the thread Fd fault on Ideal Heat 15.
      Ok, wired pump in to plug and ran off the mains. Power lights stays on and pump is running. Turned boiler on and same fd code. Any other...
    • S
      Sarah80 replied to the thread Fd fault on Ideal Heat 15.
      Thank you. We will try that and I’ll come back to you. Appreciate your help. We are so cold!
    • S
      Sarah80 replied to the thread Fd fault on Ideal Heat 15.
      Thanks for your reply, do you mean to wire it to plug top whilst it’s connected to pipes or to remove the head & see if it runs?
    • S
      Sarah80 posted the thread Fd fault on Ideal Heat 15 in UK Plumbing Forum | Plumbing Advice.
      Got fd code on Ideal Logic Heat 15. Had two plumbers out and no joy. It’s had a new water flow sensor, flush with sentinel x800 and...
    Show older items
  • Loading…
  • Loading…
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock