B
Barry98
good pics by the way lets keep them coming
Discuss HALL of SHAME PHOTo`s in the Plumbing Jobs | The Job-board area at PlumbersForums.net
haha that made me chuckle if he didnt een thik tto cut the end dowm to make bigger opening not that that would make it right in any way just shows his lack of braincells hahaWhile I'm on a roll. Called to a job, new boiler with vertical flue. Water ingress had destroyed the pcb. Manufacturer declined to repair, put it down to faulty flue joints. I attended and checked the flue, all fine. I then noticed a joint in the tubing coming from the condense pump. When I filled the pump with water it turned on and water sprayed out of the joint. Investigation revealed that the tubing had been joined with a biro casing. This may have worked had the installer not left the pointed end on and left this pointing towards the pump. It's no wonder it leaked trying to pump through a hole a couple of mm across.
View attachment 5023View attachment 5024
don't know which is better your coke bottles or mike's biro for ingenuity lolOh and then a flue made from coke bottles and duct tape. Always good.
Reply to HALL of SHAME PHOTo`s in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.