On today's one no i didn't, as i have previously tried that on the last LPG rangemaster which i encounter this problem on and the same thing happened at a larger injector too. Is the way i'm carrying out the test in my first post seeming the standard procedure to you?
Discuss Gas cooker/Hob pressure testing and fitting questions. in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Messages
- 34,366
- Solutions
- 2
yes an acctable method best way would be to cut a test point into the line before the outlet / appliance
Cool thanks Shaun at least i know my procedure is correct. Yeah i will on everyone i fit from now on its just bloody easier. Probably give one off these ago as well to save trying to bodge the hose onto it push in the knob and balance a manometer....
Thanks for your help i appreciate it
Thanks for your help i appreciate it
- Messages
- 10,444
Got a link for that?Cool thanks Shaun at least i know my procedure is correct. Yeah i will on everyone i fit from now on its just bloody easier. Probably give one off these ago as well to save trying to bodge the hose onto it push in the knob and balance a manometer..
Thanks for your help i appreciate it
- Messages
- 34,366
- Solutions
- 2
- Messages
- 34,366
- Solutions
- 2
Cool thanks Shaun at least i know my procedure is correct. Yeah i will on everyone i fit from now on its just bloody easier. Probably give one off these ago as well to save trying to bodge the hose onto it push in the knob and balance a manometer..
Thanks for your help i appreciate it
tbh these are handy
Gas Test Point Adaptor Brass - 1/2" BSP M x F - 15204 | BES.co.uk
straight into the cooker inlet then the flex into that
- Messages
- 10,444
Any good?
Yeah might be a idea to keep one on the van good thinking, wont take 5mins to couple up
- Messages
- 10,444
Excuse to give the injector the once over.
Reply to Gas cooker/Hob pressure testing and fitting questions. in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Hi all. Hope you have all been keeping well.
A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper...
- Bob Kerr
- The Welcome Wagon :)
