Search the forum,

Discuss Why is my radiator making clicking noises when the heating is on? in the USA area at PlumbersForums.net

Messages
4
I hope someone can help. I have had an issue with the radiator in my room for months. Every time the heating is switched on, the radiator makes an awful clicking noise. It's so irritating that I can't sleep. I've tried bleeding the radiator several times and this hasn't solved the issue. What do i do?
 
As above, could be no lugs on radiator brackets, pipes and other metals expanding, TRVs can chatter as well
Lugs, these are little plastic inserts which fit into the slots on the radiator brackets. The radiator straps fit into the slots and into the lugs. If its a new thing on an old rad then this is unlikely. If its pipes rubbing on the joists when they expand and contract try some lubrication. Centralheatking
 
sounds like the rad has got crap in. and was not flushed out be fore fitting, always flush them first you be surprised what comes out sometimes, and it makes for a cleaner install, if you know what your doing take it off and flush it out, or get local plumber to sort.
 
Lugs, these are little plastic inserts which fit into the slots on the radiator brackets. The radiator straps fit into the slots and into the lugs. If its a new thing on an old rad then this is unlikely. If its pipes rubbing on the joists when they expand and contract try some lubrication. Centralheatking
What lubricant would you use?
 

Reply to Why is my radiator making clicking noises when the heating is on? in the USA area at PlumbersForums.net

Similar plumbing topics

Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
223
P
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
147
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
307
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
359
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock