Search the forum,

Discuss Which thermostat/receiver can I use for my Vokera easi-heat + CI in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

B

Brocks

Hi all,
So I have a Vokera easi-heat+ci with the thermostat that comes with it, the thermostat and receiver are useless, and keeps disconnecting, is there a thermostat that will directly replace the old one IE plug and play type replacement.
Thank you for any help in advance.
 
I’m unfamiliar with the boiler - does this plug into the boiler, or is the receiver wired into the boiler?
Hi yes it plugs in and the receiver has magnet on back and sits on the outside of the boiler, but boiler is in loft and if the thermostat is not left on landing the signal will not hold. h
I’m unfamiliar with the boiler - does this plug into the boiler, or is the receiver wired into the boiler?

[/QUOTE]
I’m unfamiliar with the boiler - does this plug into the boiler, or is the receiver wired into the boiler?
 
Given it’s in the loft, there’s some wireless ones that may struggle as they ask for a clear unobstructed path for them to work. I don’t know of a plug and play type replacement, but perhaps a hard wired type might work better, unless anyone can recommend an alternative wireless one.
 

Reply to Which thermostat/receiver can I use for my Vokera easi-heat + CI in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
241
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this for suitability. The thing is my son panics during tests/exams. Is there any book I can buy him to practice the multiple choice test for the exam? What...
Replies
3
Views
426
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
308
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
274
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
482
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock