Discuss Which core drill set? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Jennie

Gas Engineer
Messages
283
Hi all,

I need to buy a core drill set (4inch, inch1/2, inch1/4) to use with my SDS drill.

What sets would you recommend? I'm after something reasonably good - probably diamond tipped. But reasonably priced.

Thanks everyone,

Jennie
 
Hi all,

I need to buy a core drill set (4inch, inch1/2, inch1/4) to use with my SDS drill.

What sets would you recommend? I'm after something reasonably good - probably diamond tipped. But reasonably priced.

Thanks everyone,

Jennie
Hi Jennie,

I hope you will have as well some sort of clutch on your sds otherwise it will rip your arm off.
 
I've always used my colleagues drill bits in the past. But now the time has come to get my own.
I do not know what's the price range but I can recommend spectrum mbx5 diamond core drill set. It ain't cheap but i think good tools shouldn't. I think could get also some cheaper sets but do not know what's the quality like.
The Erbauer set is ok for the price but again it depends on how often you use the core drill set. If it's 3/4 times a year then it will be ok to go cheaper.
 
Rothenburger do a set for about £100 Plumbase usely have them in, depends how much drilling you intend doing had mine a couple of years & been OK.
 
Rothenburger do a set for about £100 Plumbase usely have them in, depends how much drilling you intend doing had mine a couple of years & been OK.
Don't waste Yer money on the rothenberger set, it will last less than 6 months of light use and look like a toothless hag! Better off buying a cheap set fer fifty quid off the pikey vans that go round the site and believe it or not, for a change the pikeys won't be robbing Yer!!!!!!!
 
Status
Not open for further replies.

Reply to Which core drill set? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all, this is probably a daft question but I need to run my cold feed from one side of my wall mounted boiler to the other. Running it beneath...
Replies
2
Views
219
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the...
Replies
0
Views
178
B
  • Locked
Hi All, I am a 16 year old school leaver (Sept 23) looking for a local company to take me on as an apprentice plumber. I live in Benfleet and am...
Replies
0
Views
90
Billy Barnard
B
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
270
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
444

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock