Search the forum,

Discuss Vaillant ecoTec fault signal in the Central Heating Forum area at PlumbersForums.net

Messages
5
Does the Vaillant ecoTec have an output that I can connect to an external buzzer to alert me when it’s shut down with a fault?
 
I find my wife performs that function
Nothing I’m aware of, but you can get audible alarms for condensate pumps. Any reason? They normally come up with a Fault code.
It always shows a fault code, but you have to look for it. So the first I know is when I’m standing in a lukewarm shower or my wife complains that the house has gone cold. I’m looking for an early warning to make life easier.
 
Vaillant VR40 accessory module. It will let you output ultra low voltage on fault condition.

I set up 3 orange strobes in a buildings office connected to 3 separate VR40’s (1 in each of 3 boilers).

This allowed the site manager to see when a boiler had gone down without going to the boiler house.
Thanks. Sounds just what I need. Based on my experience of VaIllant, that building must be lit up like a Christmas tree.
 
Thanks. Sounds just what I need. Based on my experience of VaIllant, that building must be lit up like a Christmas tree.

That’s an opinion I don’t often come across. How come you’ve had enough issues with Vaillant to garner your opinion?

I get people have their preferred manufacturers and I’m biased (Vaillant approved), but I have very few issues with the ones I fit.
 
That’s an opinion I don’t often come across. How come you’ve had enough issues with Vaillant to garner your opinion?

I get people have their preferred manufacturers and I’m biased (Vaillant approved), but I have very few issues with the ones I fit.
That’s an opinion I don’t often come across. How come you’ve had enough issues with Vaillant to garner your opinion?

I get people have their preferred manufacturers and I’m biased (Vaillant approved), but I have very few issues with the ones I fit.
Very little experience to be honest. I’ve had this boiler for less than three months and it’s shut down at least seven times with a variety of codes. Three engineer visits have failed to rectify it. The blasted thing seems to be too sensitive to its environment. Maybe I’m just unlucky, but if it’s going to keep turning off on a whim I really need an audible fault warning.
 

Reply to Vaillant ecoTec fault signal in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
316
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
133
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
241
    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with advanced features - these cordless press tools are engineered for speed, precision, and ease of use across various applications. Just reply to this thread...
Replies
5
Views
864
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
235
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock