Discuss Unvented help? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

petershire

Hello all, I need some advice please?

I shut the gate valve next to the UV cylinder and drained down the tribume premier unvented system and replaced the faulty 18 litre expansion vessel ( white ) with an identical one ( generic red ) and opened up the gate valve and now have no water coming out the hot taps ( only an intermittant dribble at best )

The central heating was bled and is working fine as it the cold taps, the bar pressure is slowly going up and not ive shut it all down as it reached 2.5 bar in nearly 24 hours

Any ideas on whats gone wrong and how to fix please?

I would appreciate any help resolving the issues please?
 
Well you've broken the building regs and the water bylaws so I suggest you employ a G3 qualified plumber to come and rectify the problems you've created.
 
I got a bit of a shock the other day when replacing an expansion vessel, it was grey. Luckily there was a sign onnthe box 'dont panic, the colour has changed' :)
 
The hw vessel will have been wras approved as it's potable water, so the membrane will not contain any contaminants so safe for human consummation ( so they say )
 
Never dismantled a potable one, but I believe its more of a balloon inside the vessel so the rubber contains the water within the vessel rather than the shell.
 
Status
Not open for further replies.

Reply to Unvented help? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top