Teeing boiler Prv with condense.

[stratplus]

Is high temp solvent weld different to a standard solvent weld? So is that black pipe in the picture standard solvent pipe?
What is that adapter that the tundish is fitted onto?

Sorry, misread the pipe. So is that a standard tundish?

 

[stratplus]

Most solvent weld sold is ABS which doesnt have a high temp rating, the pipe in the pic is high temp PVC C even. Which osma superceeded MUPVC for i think. Tundish is on a hepvo with "tundish adapter"

Standard solvent weld glue though.

 

[stratplus]

Standard solvent weld glue though.

Any reason why you didn’t use pushfit or mechanical fittings?

 

[tolly]

Yep standard solvent weld. I think if i did this again i would use pushfit though to save confusion. Only used that as im not a fan of pushfit waste.

 

[tolly]

Or fit a Viessmann with the combined PRV and condesnse

 

[ShaunCorbs]

Or fit a Viessmann with the combined PRV and condesnse

Still need high temp waste

 

[tolly]

High temp overflow?

 

[ShaunCorbs]

High temp overflow?

Nope not rated for blow off

 

[tolly]

How do you step up to 1 1/4" then. I assumed the viessmanns had a overflow sized connection underneath for that combined con and prv? Ive only ever seen one vitodens and didnt pay too much attention to it

 

[Atouchofgas]

Heard a few rumours that the hot-un Sodes water as it can’t get it away quick enough.
Lot of folk are talk about this one instead
TESLATUN - Dry Trap Tundish | Tesla (UK) Ltd