Pressing jaws

Post new thread

Discuss Pressing jaws in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Chalked

Chalked

Esteemed
Plumber
Gas Engineer
Messages
5,021
Anybody recommend a place to get a good deal on pressing jaws?
Im after 15.22,28,35 and 42mm heard rems is not so good, so looking at novapress.

cheers.
 
Rems are decent enough fella. Used them plenty of times with no issues at all.
 
Give Con a call on 00353868761586 and he can probably get you the best price around.
 
Howsie said:
Give Con a call on 00353868761586 and he can probably get you the best price around.
Click to expand...

Thanks
Is that a mobile or land line?
Where are they based and what's the company called.
Cheers
 
you looking new or used, as the 42-54mm will set you back about £900 ?

and about 150 per jaw for the 15-35mm (each)

if your looking used i can supply some links if you would like?
 
Chalked said:
Thanks
Is that a mobile or land line?
Where are they based and what's the company called.
Cheers
Click to expand...

Mobile. Company is [DLMURL="http://clmheatingsolutions.com/"]CLM Heating Solutions - Hard work made easy[/DLMURL] and they are based here and in Ireland. Great service and very good pricing and support!
 
Last edited by a moderator:
Thanks, I've got the 42mm. And 54mm. They came with the machine. It's all brand new
( geberitt novapress) paid £350 for it, so don't mind the cost of the jaws.
 
 
 
Chalked said:
Unfortunately my wife got our address barred from eBay! Long story. Not her fault.
Click to expand...

can give you his number if you want very nice guy
 
 
Howsie said:
Are they all second hand?
Click to expand...

second hand/ nearly new they guy is fussy with quality so i would say there new old stock tbh

but the last link dont have a clue as havent dealt with them before
 
Chalked said:
That would be great Shaun.
I have PayPal , but alas no eBay! It's probably saved me buying tons of tat over the last few years.
Click to expand...

:D not a problem and better the devil you know
 
sent and ask a deal if you buy them in one go as he wont have to pay ebay fees ;D
 
Hi there I've got a rp340 ridgid press ... can you use other branded jaws with it like novopress or rems.. Cheers
 
Status
Not open for further replies.

Reply to Pressing jaws in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
248
Lou
Lou
R
Multi Meter which one for engineers
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one...
Replies
7
Views
324
oz-plumber
O
sammie81116
Sewer pipe problems not sure about it
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my...
Replies
3
Views
600
Chuck
C
P
LCS to new water mains
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new...
Replies
2
Views
281
ShaunCorbs
ShaunCorbs
C
Greenstar Boiler Not Working
I have a green star ten yrs old keeps increasing pressure, feel on off filling valve not working, drain off to recommended, but after few days...
Replies
1
Views
220
Lou
Lou

Newest Plumbing Threads

Back
Top