Discuss Pressing jaws in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Chalked

Esteemed
Plumber
Gas Engineer
Messages
5,021
Anybody recommend a place to get a good deal on pressing jaws?
Im after 15.22,28,35 and 42mm heard rems is not so good, so looking at novapress.

cheers.
 
Rems are decent enough fella. Used them plenty of times with no issues at all.
 
Give Con a call on 00353868761586 and he can probably get you the best price around.
 
Give Con a call on 00353868761586 and he can probably get you the best price around.

Thanks
Is that a mobile or land line?
Where are they based and what's the company called.
Cheers
 
you looking new or used, as the 42-54mm will set you back about £900 ?

and about 150 per jaw for the 15-35mm (each)

if your looking used i can supply some links if you would like?
 
Thanks
Is that a mobile or land line?
Where are they based and what's the company called.
Cheers

Mobile. Company is [DLMURL="http://clmheatingsolutions.com/"]CLM Heating Solutions - Hard work made easy[/DLMURL] and they are based here and in Ireland. Great service and very good pricing and support!
 
Last edited by a moderator:
Thanks, I've got the 42mm. And 54mm. They came with the machine. It's all brand new
( geberitt novapress) paid £350 for it, so don't mind the cost of the jaws.
 
Unfortunately my wife got our address barred from eBay! Long story. Not her fault.

can give you his number if you want very nice guy
 
Are they all second hand?

second hand/ nearly new they guy is fussy with quality so i would say there new old stock tbh

but the last link dont have a clue as havent dealt with them before
 
Status
Not open for further replies.

Reply to Pressing jaws in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top