Search the forum,

portable compressor for exp vessels

Post new thread

Discuss portable compressor for exp vessels in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

buckley plumb

can anyone recommend a good cheap one for exp vessels . worn my arms out today doing a unvented exp vessel
 
Use the gas bottle from screw fix, no need to lug heavy compressor. Recharge it local garage. Also helps on services.

ba10a4075545ee79b1db9edc6cc2946e.jpg
 
Stanley DN/8/5 4.5Ltr Portable Air Compressor 240V | Compressors | NoLinkingToThis

I have one of these in the van, does the job plus it will do my landy and van tyres but takes a bit longer than a garage compressor.
 
lame plumber said:
Stanley DN/8/5 4.5Ltr Portable Air Compressor 240V | Compressors | NoLinkingToThis

I have one of these in the van, does the job plus it will do my landy and van tyres but takes a bit longer than a garage compressor.
Click to expand...

cat see that only 12v one and normal one
 
cheers found it in toolstation is it any good for the unvented 3.5 and 4 bar vessels
 
Status
Not open for further replies.

Reply to portable compressor for exp vessels in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
140
Stigster
Stigster
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
344
Chuck
C
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
SimonG
SimonG
F
Mystery Mira Elite QT Leak
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
235
Firefox
F
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
256
exedon2
exedon2
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tilers' Talk
Tile Blog
Contractor Advice Forum
Tiling Advice
TilersForums.co.uk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock