Search the forum,

New strainer needed. What is the proper name for this?

Post new thread

Discuss New strainer needed. What is the proper name for this? in the USA area at PlumbersForums.net

S

spinnerc41

Messages
7
Removed this from a valve in my heat pump it needs replacing as the top ring now loose.
Does anyone know what its called and where to get one.
20220104_145737.jpg
 
you could clean it up and solder it onto the filter mesh
 
As above the strainer manufacturer should have spares , but it could be repaired as Shaun says its a basket mesh filter you could try online.? I found this company with a simple search on Google
 

Attachments

  • Screenshot_20220108-062908.png
    Screenshot_20220108-062908.png
    265.9 KB · Views: 7
Last edited:

Reply to New strainer needed. What is the proper name for this? in the USA area at PlumbersForums.net

Similar plumbing topics

B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
182
ShaunCorbs
ShaunCorbs
R
Multi Meter which one for engineers
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one ....just easy to use and reliable. The fluke 115 looks good but its above my budget. My current socket and see one was great but it's developed a fault.
Replies
7
Views
217
oz-plumber
O
T
Trying to source a dual-flush valve
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
191
Thomas J Marshall
T
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
171
mutley racers
M
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
189
SimonG
SimonG
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock