Method statement for unvented cylinder

[markfxy]

I need to write a method statement for unvented cylinder installation anyone done one or got any ideas, when it comes to paperwork I'm fecking clueless so any help would be appreciated:blush5:

 

[rocketmanbkk]

Good luck

 

[mountainman]

Method statements are a nightmare, you would think that there would be a modifiable template.
But there isn't.
As rocket says, good luck!

 

[Millsy 82]

1) drain existing tank.
2) rip out tank and throw it in van away from thieving little scrotes.
3) fit new unvented.
4) fill up and test.
5) get paid and go.

As you can tell I have never done one.

 

[Barry98]

Hmmmm possibly I may

 

[markfxy]

come on then spill the beans:winkiss:

 

[Dotty]

Identify potential hazards.
Document the actions required to remove, avoid or deal with the hazards including LOLAR.
Identify the manufacturers literature and any other legislative documentation you'll be working to.
Identify the class of persons permitted and authorised to carry out the work.
List those people and the relevant qualifications they carry (G3, CSR card).
List all materials used covered by COSHH.
Document the tools you'll be using under PUWER.

Just as a start.......

 

[AWheating]

identify yourself to tennant
put dust sheets down
drink tea
cut cable to immersion heater with pliers
phone sparks to fix blown electrics
drink tea
find out new cylinder wont fit in /AC
cap pipes and go home
drink tea
etc........ etc........

 

[rocketmanbkk]

Remember to add the cost of writing the thing to the bill. It's not a 5 minute job and will take ages. Don't do it for free

 

[Barry98]

Pm me your email

 

[Barry98]

Sent.

 

[markfxy]

Thanks BOD thats just what I was after could never have written that myself, would've been more like millsy's effort:smile5:

 

[REDSAW]

unpack cylinder
follow m.i
get paid.

fek off

 

[Ermintrude]

Arrive at site.
Check and don Ppe.
Carry out visual site spesific risk assessment . Implement controls to minimise likley hood of harm arising from risks identified.

Ensure safe access and egress from work space

Isolate and make safe energy supplies

Isolate and drain services to ape-operate water way.

Remove old unit ensuring that all sharp edges are guarded. Lift and remove to safe place and dispose of in accordance with site waste management plan. Item is a two man lift and shall be lifted ibs ordnance with manual handling ACOPS from HSE website

 

[Ermintrude]

Cylinder shall be installed in accordance with MI. Soldering and hot works subject to acops and hot works permit

Once compete cylinder shall be commissioned as per mi then handed over to client. Site will be cleared and checked for hazards and left in a safe and tidy manner