Search the forum,

Kettling ideal classicFF

Post new thread

Discuss Kettling ideal classicFF in the Central Heating Forum area at PlumbersForums.net

T

Twochutes

Messages
1
My boiler keeps kettling even though stat is right down, 2 plumbers have both flushed and chemically cleaned system. Could it be the pcb
 
ideal classic is cast iron heat exchanger so could just be weak spots in that you may not be able to remedy, whereabouts are you could it be limescale build up if so try a boiler silencer eg sentinel
 
Last edited:

Reply to Kettling ideal classicFF in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
171
John.g
J
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
179
Lou
Lou
SnosRap75
Boiler losing pressure only on central heating
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
227
SnosRap75
SnosRap75
S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
2
Views
124
Sonya K
S
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
247
PSxxxxxx
P
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Plumbing Advice
TilersForums.co.uk
Tilers Forums UK
Tile Blog
Tile Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock