Discuss Gas Inspection Visit in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

rob jefkins

Got my first gas inspection visit in a few weeks time which I'm not worried about as I know I work safely with gas.
However my gas merchant says that he will pull me up on not having a gas analyser. I have only been going a few months and do have CPA1 to my name. Does anyone know if this will come up???
At the moment I use a visual inspection of the flame as well as burner pressures and gas rates.
cheers
rob
 
not yet needed,relax,have your books to refer to and don't guess.they are there to help us,not trick us,you'll be fine
 
sounds like your merchant wants to flog you an fga, good luck with the inspection
 
i have my inspection on monday too.....gotta take the dude to 3 jobs that i've done,should be fun.....
 
dont worry rob, they are not all bad,most inspectors are helpful and are not there to grill you,just revise your stuff,they will be looking for tightness testing , burner pressures ,biggy is gas rates and things like spillage and flue flow checks if applicable,also gas regs but they will help and give you guidance
 
Thanks guys. Much appreciated.

Good luck mate. Let us know how you get on
 
Last edited by a moderator:
Do gas safe contact you to arrange a visit or is it down to the engineer to sort nearer the time?
 
just had my inspection today ,, very nice man , have not yet got fga or cpa1 , he got his out and showed me it ,, :) . he rang me, said in my area can he inspect now .. all ok ..
 
all inspection are different i guess..my first and only inspection so far was so straight forward i could of done it over the phone.
 
ive got mine next week, im very nervous. i have been working for a company for a while nw, just applying for my own gas safe. i mainly do servicing and breakdowns i havent installed many full heating systems so i am nt as confident on say pipe sizing and things like that. everything else i feel confident on, any pointers from ne1 would be appreciated
 
If you have CPA1 and take him to a job where the MI,s ask you to use a FGA you are gonna have some awkward questions to answer.
 
went smooth, he has took me off my probation period, he was impressed with me from the start, asked a few questions abt gas rates, n gas regs bt nuthing that was very hard. buzzing
 
I'm a new gas safe register ! ive got mine next month , im very nervous I don't event have job not yet I don't know that they guna ask me:yawn:
 
Status
Not open for further replies.

Reply to Gas Inspection Visit in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top