Search the forum,

Discuss Flexi pipe or copper pipe for gas hob? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
31
Hey guys

I've got an integrated electric oven with a gas hob directly above.
How do I connect this hob to gas? I've done a bit of googling and I've read that you can connect the hob to the gas line with a flexi pipe only if the manufacturers instructions permit you to do so (please correct me if I'm wrong).

My questions is, which manufacturers instructions? is it the hob? the oven? or pipe manufacturer?

Again, I'm not up to date with latest regs so if flexible pipe is a no no then please let me know and I'll put a copper pipe in.

Many thanks
 
Time to call a gas Engineer to install the hob
 
Status
Not open for further replies.

Reply to Flexi pipe or copper pipe for gas hob? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
184
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
226
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock