Search the forum,

Discuss Combi boiler turning off when hot water is used while heating is on in the USA area at PlumbersForums.net

Messages
4
Hi all,

We had a new combo boiler (Intergas eco RF) installed about six months ago. When we are using the central heating and then use hot water, the boiler turns off (error code 4 - ignite). The boiler is fine when using hot water when central heating is off, and central heating is fine until we use hot water.

Any ideas what could be causing this?

Thanks
 
At only 6 months old it’ll be under warranty, even if your installer can’t come back or fix it. Could be a loose connection, could be a pcb fault.
With the guarantee on a combi mean that the manufacturer sends someone out to have a look? The installer was actually here recently to fix another issue, but couldn't work out what the cause of this was. It was purchased by the landlord, so might have to get them to do the warranty claim.
 

Reply to Combi boiler turning off when hot water is used while heating is on in the USA area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
115
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
221
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
242
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
1
Views
80
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
316
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock