Search the forum,

Discuss Central Heating Fault, Motorised Valve? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
13
Bit of an issue with my central heating this past few days, it's struggling to come on and was wondering if someone here could give me an idea of what's wrong.

When I turn up the temperature to trigger the heating, it often seems to fail. It's hard to say how often, because it can work fine for a few minutes whilst testing, but then minutes/hours later, I'll try it again and it will fail.

One of the valves is making a strange buzzing and clicking/tapping sound - I'm not sure if it's normal, but I'm guessing not?

When it works, I will hear the click of the thermostat, then a whirring of the valve and then the boiler comes on. When it fails, I hear the click of the thermostat and then nothing at all after. Turning the thermostat on and off a few times will usually turn the heating on.


The noise seems to be coming from the bottom unit, as you can hear in the video.

If it's relevant:
Boiler is a Worcester Greenstar 12i system boiler (showing 2 bar / just under)
Thermostat is a 3rd generation Nest
Unvented cylinder as part of the system
Every single component in the entire system is just a few months old.
 
Yea sounds like the syncron motor has gone
 
As shaun has said the motor in the zone valve is failing should be a free replacement if its only a few months old ? Cheers kop
 
As above ^^^

, just under 2 bar ... way too much , should be approx 1 bar when system is cold
 
The toothed arm inside those Honeywell valves is sloppy and wears. They are poorly made IMO.
You will hear a clicking sound and it will typically work intermittently for a few weeks or months, until failing totally
 
Thanks for the replies. I thought it might be the motor, I changed it earlier today. It's reliable now, in that it will turn on/off on command. However, the mechanism inside seems to operate slowly. Is this normal? Video below, you can just see the gold mechanism moving:

 
Yep standard

There made for toque not speed
 
Status
Not open for further replies.

Reply to Central Heating Fault, Motorised Valve? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
128
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
186
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
137
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
451
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
324
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock