I have a Baxi Duo Tech 28 HE. According to an online search with the serial number and GC number, I should have a 20-plate heat exchanger. So, I purchased a 20-plate unit. However, when I removed the old part, it appears to have 12-14 plates. Is there any harm in installing a 20-plate exchanger instead of the 12-14 plate one?
- Thread starter acerf1
- Start date
- Replies 1
- Views 545
- baxi baxi boiler
- boiler
Discuss Baxi boiler - heat exchanger in the Central Heating Forum area at PlumbersForums.net
- Messages
- 34,370
- Solutions
- 2
Nope updated version
Reply to Baxi boiler - heat exchanger in the Central Heating Forum area at PlumbersForums.net
Similar plumbing topics
- Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no...
Hi all. Hope you have all been keeping well.
A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
We are from Alberta, and I own an electrical company.
I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Newest Plumbing Threads
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 1
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 2
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 2
-
Expansion vessel size unvented hot water
- Started by Matt0029
- Replies: 2
-
Acrylic bath manufacturing standards/dimensions
- Started by Michelle
- Replies: 2
-