Search the forum,

Alpha cb24 problem

Post new thread

Discuss Alpha cb24 problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
N

nabby 68

Hi
got a problem with an alpha cb24, I have no hot water at all even when I've set the control knob to hot water only. How do I check to see if it's the flow switch or diverted valve or diaphragm.
is Alphaman about!
thanks
 
This plumbing forum will not provide advice to anybody with regards to boiler repairs or any other form of gas plumbing without you first providing us with your Gas Safe Registration number in a thread - for very obvious reasons. If you're not qualified to touch gas, you should stay well clear of trying to!
 
nabby 68 said:
Hi
got a problem with an alpha cb24, I have no hot water at all even when I've set the control knob to hot water only. How do I check to see if it's the flow switch or diverted valve or diaphragm.
is Alphaman about!
thanks
Click to expand...


PM a mod and they check you are GS registered, there is another section of the forum where boiler repairs are discussed.
 
Status
Not open for further replies.

Reply to Alpha cb24 problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
128
Lou
Lou
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Chuck
C
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
137
fowlerboi
F
N
Towel Rail Valve Advice please (35 Characters needed.)
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
186
Timmy D
T
ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
143
John.g
J
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Standards BS5389
Electrical Advice | Electricians Blog
Tilers' Talk
Tiling Forum UK
Tiling Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock