Discuss 1300mm Shower Trays in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
U

Unregistered

Can anybody recommend a good quality manufacturer of 1300mm shower trays?
 
Not until you're registered, no.

Oh, and please start a new thread when you are.
 
Status
Not open for further replies.

Reply to 1300mm Shower Trays in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have a leak from my shower, it's coming down into my kitchen. I've had the sealant, waste pipe and tray all checked. I've also had the shower...
Replies
9
Views
259
Does anybody have any experience of Zamori acrylic shower trays and how they perform in use? - also how they compare to the (very heavy) stone...
Replies
1
Views
194
I've got an issue with the shower tray not being totally flat. As you can see from the photos, it is about 7mm out at one side. It's leaning...
Replies
5
Views
587
Hi all. Sometime ago I removed our old 1200x800 shower tray and replaced with a Stone resin one. The stone resin tray was much, much heavier than...
Replies
2
Views
467
Hi all, I have a couple of leaks coming under shower tray downstairs. One is along the wall so think might be joint between wall and tray and...
Replies
0
Views
296

Newest Plumbing Threads

Back
Top