Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Corvec Brittony II Multipoint in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
4
We have a Corvec Brittony II multipoint that will only ignite the main burners if the temperature control knob on the front of the multipoint is turned up to its maximum heat setting - making the water too hot to use. Do you know what the problem could be?
 
Ok 2 yr ago so it is not due a full service for another year then, Did you have the basic service done last year? I would still have a full service carried out by your local GSR as it sounds like it needs one & they could also see if anything else is wrong while they are there. I do suspect what is wrong with it but am not willing to share this due to people trying to have a go themselves at mending their own gas appliances by reading these threads. Not saying you would be that daft though. Hence the advice to have a full service done as what I think it is will be changed on a full service.
 
Thanks Darren, hopefully it is not a major component/problem then. Are you in the Kent area and if so what would be your charge for a full service.
 
Good advice from the guys above ^^^ , be aware some parts are getting hard to get hold of for these mulipoints , don’t throw a lot of money at it , it maybe time to change it depending on its age .
 

Reply to Corvec Brittony II Multipoint in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
217
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Replies
5
Views
552
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
334
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
321
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
286
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock