What type of immersion heater is this?

[townfanjon]

TBH there are a lot of photos I cannot open.
A lot say I don't have permission.

You wouldnt like to look at RPM's photos anyway , thank yourself lucky

 

[rpm]

Laptop

Well the door is wide open for a wisecrack,
But being nice, I don`t know mate.

 

[rpm]

You wouldnt like to look at RPM's photos anyway , thank yourself lucky

Oi! Behave or I`ll send you some real nasty one`s via a PM. :90:

 

[rpm]

TBH there are a lot of photos I cannot open.
A lot say I don't have permission.

Somebody else had this problem a few weeks back, don`t know the answer sorry.

 

[snowhead]

Back on topic.

That's not a safety stat that's the control stat.

It's either fixed temp or the adjustment is on the side where it's pushed into the pocket.

 

[ShaunCorbs]

not safe to use

 

[jonnyp]

Why?

 

[ShaunCorbs]

Why?

no safety limit non resettable thermostat

 

[jonnyp]

OK. Thanks. Presumably if its got a thermostat then that will switch off at preset temp eg 75°? I only want to use it for a few days and was planning on setting the timer for only 2 lots of half hour but curious as to what sort of temp (if any) it would switch off at.

 

[townfanjon]

Sorry I cant see the pic , but the cylinder should not be set above 60 ( through a control thermostat ) a thermal store can go higher . It MUST also have a highlimit thermostat that operates if the control stat fails , and they do .
Some , high and control stats are combined as one