Power flush Machine

[gassafe]

Plus you have to fit a Magnaclean to join the device onto... It's all just a Magnaclean money spinner... I'd much prefer to use my magnets with the powerflush device...

You can't expect a 15/50 to pick up & push the same amount of crud to the magnets... Not to mention the change of flow direction & ability to dump old water & fill with fresh mains water

 

[jaydebruyne]

Jay in the meanwhile if you want to try out a Kamco (the best kit in my opinion) you're welcome to borrow mine.

I know they're a lot of money but my machine paid for itself in 3 jobs.

Aw cheers Mas!!! When I get a flush job I'll let you know. Thanks so much!!

 

[Masood]

Aw cheers Mas!!! When I get a flush job I'll let you know. Thanks so much!!

No worries mate..

 

[jaydebruyne]

Jay in the meanwhile if you want to try out a Kamco (the best kit in my opinion) you're welcome to borrow mine.

I know they're a lot of money but my machine paid for itself in 3 jobs.

The cheapest place I found this was here, for £912. Is this a good price? The spec looks good for what I'd need it for, can do up to 25 rads.
http://www.plumbingandheatinguk.com/KAMCO/Clearflow-CF30-Classic.html

Was also looking to get this at the same time, is it worth it?
http://www.plumbingandheatinguk.com/KAMCO/Kamco-CombiMag.html

 

[jaydebruyne]

Anyone ever used the Anton unit?
Anton Flowclean Plus Powerflusher Kit

 

[Masood]

The cheapest place I found this was here, for £912. Is this a good price? The spec looks good for what I'd need it for, can do up to 25 rads.
http://www.plumbingandheatinguk.com/KAMCO/Clearflow-CF30-Classic.html

Was also looking to get this at the same time, is it worth it?
http://www.plumbingandheatinguk.com/KAMCO/Kamco-CombiMag.html

Definitely worth getting the Combimag. It pulls ferrous oxide particles out of the water, so they don't just get pushed round and round. Makes the job quicker and more thorough. Also great for showing the customer - it really impresses them when you've pulled a couple of kilos or more of crud out of their system.

Not sure about the prices - it's been ages since I bought mine. Have you phoned Kamco for a price? They sell direct as well.

 

[Masood]

Anyone ever used the Anton unit?
Anton Flowclean Plus Powerflusher Kit

A mate of mine had that. Build quality seemed a bit flimsy to be honest.

 

[ShaunCorbs]

Definitely worth getting the Combimag. It pulls ferrous oxide particles out of the water, so they don't just get pushed round and round. Makes the job quicker and more thorough. Also great for showing the customer - it really impresses them when you've pulled a couple of kilos or more of crud out of their system.

Not sure about the prices - it's been ages since I bought mine. Have you looked at Kamco's website? They sell direct as well.

think the big mag that ray sells is cheaper than that

 

[jaydebruyne]

think the big mag that ray sells is cheaper than that

The magnacleanse? So you can use that the same way you would a combimag?

 

[jaydebruyne]

Definitely worth getting the Combimag. It pulls ferrous oxide particles out of the water, so they don't just get pushed round and round. Makes the job quicker and more thorough. Also great for showing the customer - it really impresses them when you've pulled a couple of kilos or more of crud out of their system.

Not sure about the prices - it's been ages since I bought mine. Have you phoned Kamco for a price? They sell direct as well.

No I didn't call them, didn't realise they sell direct. Never mind. To be honest, I doubt I'll do much flushing to start with anyway so this one will be suitable for now. But I deffo want to get either a magnacleanse or a combimag as well - the fact it cuts time down is a bonus!!!